Pre-Job Checklist: Confirm the Surface and Goals
Start by inspecting the existing slab for cracks, spalling, moisture issues, and unevenness. Verify that the concrete is structurally sound and that repairs are completed before any finishing. Define the look you want—low-sheen, satin, or high-gloss—and decide whether the finish should emphasize polished concrete smoothness, stain resistance, or reflectivity. Plan for edge treatments, transitions, and any areas that require special protection during work. A clear scope prevents surprises and helps ensure the finished surface meets both performance and appearance expectations.
Material and Prep Checklist: Clean, Repair, and Densify
Confirm the polishing system selected for the slab type and condition. Ensure the floor is thoroughly cleaned and free of curing compounds, paint overspray, and contaminants that can block uniform grinding. Address defects with appropriate patching and grinding to create a consistent profile. Densifier application should epoxy floors be scheduled based on the concrete’s porosity so the finish develops evenly. Follow dust-control best practices to protect the workspace and support a clean, uniform result. Proper preparation is what makes the final finish look balanced and last longer.
Polishing and Protection Checklist: Achieve Shine and Long-Term Performance
Use staged grinding through the required levels, checking flatness and texture as you progress. Inspect for haze, inconsistent sheen, and localized defects after each stage so corrections happen early. Apply protective treatments to improve stain resistance and make the surface easier to maintain, especially in high-traffic areas. Confirm curing and recoat timelines for any coatings used alongside the polishing process, including where a layered approach is desired. Finally, review care guidance with facility staff so cleaning methods match the finish and preserve gloss over time.
Conclusion
Choosing the right process comes down to disciplined prep, consistent polishing, and correct protection. Use the checklist to validate slab condition, plan the desired finish, and confirm maintenance requirements before work begins. With ACC Facility Services, your floors can deliver a durable, stylish surface that supports everyday cleaning and long-term visual appeal.